Frys Hill Repeater Group

repeater systems for todays radio amateur

IRLP   ECHOLINK   ALLSTAR

50.770MHz / 51.270MHz 77Hz

Here are the technical details you will need to access or operate each repeater. Some of them have common facilities or features. Check out the “more details” link for more.

Located on Frys Hill, the aerial is around 30m AGL on the S.W. leg of the mast, at roughly 270 deg looking down the Severn Estuary.

Tait 300 repeater with external ASCOM PA—25w erp. Garex preamp.

G B 3 F H

430.925MHz / 438.525MHz

Located on Frys Hill, the aerial is mounted around 4m AGL on the building roof. Omni coverage,.

Tait 800 series 1 repeater, 10w erp

Text Box: G b 3 f i

IRLP   ECHOLINK   ALLSTAR

50.800MHz / 51.300MHz

Located on Dundry Hill, the aerial is mounted approx 25m AGL on the East facing leg of the mast facing along the top of Dundry Hill.

Tait 300 repeater with external ASCOM PA—25w erp. Garex preamp

g b 3 z y

IRLP   ALLSTAR

430.825MHz / 438.425MHz

Text Box: Located on Dundry Hill, the aerial is mounted around 25m AGL. Omni coverage.
Tait 800 series 1 repeater. 10w erp.

G B 3 Z B

FREESTAR

439.450MHz / 430.450MHz

Located near Bristol the aerial is approx 20m AGL. Omni coverage.

Tait 800 series 1 repeater, 10w erp.

G B 7 B D

Allstar  Maybe Echolink

145.3375MHz 77Hz tone      

 Located in Shipham, this test node is a simplex gateway.

A CTCSS tone of 77Hz is required and it uses the standard command set that all the other repeaters employ. Mainly used for test and development.

 M B 7 I F H

Repeater list

50MHz

70cm

50MHz

70cm

70cm

2m